問：本機ip地址為：127.0.0.1
謝謝啦！
希望未來針對自定義鏡像的機器 進行裝完自動設置,新裝自定義系統需要幫忙辛苦設置一下ip地址
答：您好，
127.0.0.1 網路已經暢通，IP地址已經可以正常SSH遠程。
非常感謝您對我司的支持，謝謝！
問：配置的不對，基本網卡應該都修改一下，辛苦幫忙重新修改一下，謝謝啦
答：您好，當前服務器網卡已經為您重新配置，服務器已經可以遠程連接，請您重新核實查看,非常感謝您長期對我司的支持!
問：[@ebs-5448]~# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 127.0.0.1 netmask 127.0.0.1 broadcast 127.0.0.1
inet6 fe80::215:5dff:fe93:45ad prefixlen 64 scopeid 0x20<link>
ether 00:15:5d:93:45:ad txqueuelen 1000 (Ethernet)
RX packets 32516 bytes (3.1 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 6110 bytes (1.1 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::5054:ff:fef2:a527 prefixlen 64 scopeid 0x20<link>
ether 52:54:00:f2:a5:27 txqueuelen 1000 (Ethernet)
RX packets 7412 bytes 693099 (676.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8 bytes 620 (620.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 127.0.0.1
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 12025 bytes 749192 (731.6 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 12025 bytes 749192 (731.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eth1里面的 內網ip不行。。。辛苦幫忙再看看啊
答：您好，
核實內網IP正常，請查看,非常感謝您長期對我司的支持!